- Coffered ceilings
Suspended ceilings are of indoor decoration material that should be considered during the installation of this product. When assembling must be a certain temperature.
- Mounting sinkskitchen sink InstallationInstallation of artificial stone sink
installation process mortise sink countertop quite simple and can be done independently. To prepare in advance of such tools and materials: Drill, Jig, screwdriver, screwdriver, Sealant, Clamps, pliers.
Open wiring is different in that it passes over the surface of walls or ceilings, and not within them. Currently, she is rarely used, but in the past it is quite common in both residential and ancillary rooms.
- Mounting ceiling Armstrong
On this page you will find instructions on the site how to make installation of the suspended ceiling. To describe the installation of the suspended ceiling, we have included such subcategories as: profiles used for the installation of the suspended ceiling; Arrangement ceiling Armstrong and some elements of the design; Consumption of materials when installing a suspended ceiling using 3 standard mounting schemes; Installation recommendations.
- Mounting ceiling Grilyato
On this page you will find instructions on the site how to mount the ceiling Grilyato. Scheme assembly required for mounting ceiling Grilyato Installation recommendations ceiling lattice Grilyato supporting rail C180 bonded to the intermediate rail C120 or C60 and hung on the design height by spring hangers in increments of no more than 1000 mm. By mid fastened guide rail C120 C60.
- Installation of suspension suspended ceilings
Installation of suspended ceilings begins with attachment to the intended line trim level. To do this, you must use the spirit level to make a mark on the perimeter of the room at that level, which will be installed new ceiling (it must be remembered that the minimum distance from the slab to the new ceiling should be 130mm.
- Installation of polypropylene pipes with his hands
When designing and installing a pipeline from polypropylene tubes should be considered for this material and features available assortment of fittings available on the market. Polypropylene is a polymer of family poliofenov.
- Installation of drywall ceiling
This page site provides you the instructions for installation of the ceiling drywall. First we need to mark up the design position false ceiling along the perimeter walls with the help of a level, the length of which shall be not less than 1.5 meters, gidrourovnya, shnurootboynogo device (according to the project to produce the markup). Instead gidrourovnya level and in large projects for fast execution stake is advisable to use a laser level.
- Instantaneous water heater installationConnect instantaneous water heater with their hands
In the instantaneous water heater principle of operation is based on the heating of the water at the time of its passage through the heating element device . Water for admission of the water supply system passes through when you open the tap switch.
- Mounting flush
To begin the electrical work in the apartment or house is best before you start and finish with the premises. Having started the repair, it is better to change all the wiring in the house, otherwise you run into the fact that the old aluminum and lay new copper wires will be extremely poor quality, and often unnecessary.
- Wall light
In most cases, wall lights designed for illumination, but in the hallways and other narrow areas they can perform and function of the ground.
- Stretch ceiling, texture and design of suspended ceilings
Stretch ceiling is a product made from a certain bands of PVC fabric that carve out only in size room with all its characteristics.
- Stretch ceiling, installation of mounting profile
Usually profile attached to the wall, butt all the way around to desired height, which bounces laser or water level (Fig. 1). profile can also be attached flush with the existing ceiling in order not to "lose" the height of the room (Fig.
- Stretch ceiling, mounting film
If you will install the web for the first time, do not be afraid to make mistakes, you only need to follow some rules, and you'll even be surprised ease of installation. 1. The leaf is not afraid of moisture, high temperature (up to 100 º C), any mechanical effects; 2. The canvas is afraid of piercing and cutting items! 3. Get to work with the canvas with clean hands; 4. Do not let the canvas fall to the floor in order to avoid contamination; 5. Avoid dangerous proximity heaters (gas generator building dryer, etc.
- Stretch ceiling, installation of spotlights
to install spotlights You will need: fastening ring; Laser; cyanoacrylate glue; knife. setting the canvas, you have to make holes for spotlights.
- Stretch ceiling, removal of measurements
Removing measurement is the most critical part of working with stretch ceilings, as this is directly dependent on the final result.
- Stretch ceiling, installation of racks for spotlights
to install spotlights you must have: Lamp; fastening ring of forex; cyanoacrylate glue ; box size lamp with vents made of acrylic plastic, or forex, which will be attached to the existing ceiling to support the weight of the fixture.
- Stretch ceiling, the conclusion
1) select the desired ceiling height: with spotlights canvas will be spanned by a minimum distance of 7 cm from the existing ceiling; Without profile recessed luminaires can be mounted at any height; 2) repel the ceiling level on the top edge of the profile; 3) remove the dimensions (at the height of the profile); 4) draw ceiling plan (top view) - perimeter label corners letters clockwise un-needed diagonal and diagonal control, choose the color and type of blade profile; 5) make the ceiling; 6) with built-in lights: make a wiring harness, attach the transformer (s) to secure the rack for fixtures at the film, with the possibility of adjusting the height of the box; 7) prepare fastening profile: Cut the necessary minus 2cm lengths, cut the corners at an angle of 45 ° at a distance of 5 mm from the edge of the profile; 8) fix profile drafted by level (in the corners to further strengthen); 9) gently expand the film; 10) otglyantsuyte canvas; 11) secure the first corner; 12) use hooks to fix the film on flat areas; 13) heat the blade to the best (neither too weak nor too strong); 14) tuck all the angles; 15) mount the midpoints of the sides; 16) to complete the installation of the film; 17) film or warm the entire room if necessary; 18), leave to cool film; 19) with built-in lights: glue fastening ring, cut the film inside the ring, attach the cable and insert fixtures; 20) wash the ceiling.
Kitchen - studio Currently, more common type of apartments are studios. The name of this type of plan does not mean that they are only suitable for artists, usually live in these flats bachelors, girls and families without children.
- Wall tree
To begin with - a few words about the trees at all. Celts and Gauls priests - Druids, trees considered the only legitimate inhabitants of our planet. They saw deep connections between trees and people. The number and appearance of man on the month light druids determined each his sacred tree.
- Plasterboard Wall
Facing existing walls gypsum sheets (GCR) has the following tasks: Fast alignment old uneven walls; Create perfectly flat surfaces for finishing; Improvement of sound insulation and thermal insulation of the premises; Create cavity for laying the necessary communications (telephone, computer networks, security systems, etc.
- Keramimicheskoy Wall tiles
In wall tile wall is no big deal. With smooth surface, good materials and tools, it can make even a beginner. Another thing, if the walls have large bumps and drops, while nice and sharp to lay the tile will be more difficult, especially if you do it the first time.
- Wallpapers, slicing strips
strip cutting and wetting wallpaper glue to perform on the floor, while the floor is necessary to lay a polyethylene film or old useless wallpaper.
- Wallpaper paste
Scope: For all types of wallpapers: smooth, structural, corrugated, duplex, heavy, as well as vinyl and other specialty; not form lumps; Great antifungal protection; High adhesive strength; Easy to apply; Cooking time 3 minutes.
- Processing plasterboard and jointing
Before you install drywall sheets you need to become familiar with the methods of processing. Here are the methods of processing the drywall, and you can see the option jointing of gypsum boards.
- Pasting wallpaper, gluing wallpaper
Recommendations this stage not to use wallpaper with icons " ". Roller evenly wallpaper glue on a strip of wallpaper. Fold the strip as shown in Figure: . Writing wallpaper glue impregnated: Approximate time soaking wallpaper, min Thin paper 5 Dense paper 7-8 Vinyl 8-10 Textile 10 Each band Wallpaper withstand the same time soaking glue.
Film and roll materials can be used for finishing plaster surfaces, walls made of wood and plaster, chipboard, fiberboard, etc.
- Walls for heating pipes
papered walls for heating pipes carry wallpaper by sliding over the glue on the wall, so the band should be liberally coated with glue (in this case, even the icon ). Formed bruising easily smoothed with a rubber roller or a damp cloth.
- Painting walls
Painting walls - the oldest type of wall decoration. With the advent of new technologies and materials for decoration, full colored wall paint used less and less, but painting is often used in combination with other options wall decoration.
- Orange color in the interior
Orange is associated with warmth, bliss, fervor, and at the same time with the soft sheen of the setting sun. This color is always able to please the eye and improve mood.