СТРОИМ САМИ


  • Waterproofing stone structures

  • Waterproofing of stone designs stone structures to protect against the effects of moisture is necessary to arrange waterproofing.


  • Glinosolomennaya roofing

  • Glinosolomennaya roofing Glinosolomennaya roofing usually takes a mud houses or outbuildings. Most often it is used in rural areas. An advantage of this roof is that it is cheap, fire resistant, easy to manufacture, durable (may serve 25-30). But glinosoloma - heavy roofing material, so the foundation under it are made of solid wood.


  • Shingle roofing

  • Shingle roofing Shingle roof - the most expensive and time-consuming of all wood coatings, but these advantages are its strength, durability and extremely picturesque (Fig.


  • Hot bitumen roofing mastic

  • hot bitumen roofing mastic It is a homogeneous mass consisting of a bituminous binder and a filler, and additives - antiseptics and herbicides.


  • Priming steel roofing

  • Priming steel roofing One of the drawbacks of steel roofing is its rapid corrosion under adverse environmental and atmospheric conditions. To roofing lasts longer sheeting should be primed. Priming - a simple operation, which consists in the fact that the steel sheets, pre-cleaned of dust, covered on both sides natural varnish.


  • Tools for filing

  • Tools for filing Files When filing (the top layer of the sample from the part surface) Use a file of various kinds. Each file has on its working surface incisions through which a metal layer is removed, and consists of the nose, body, heel and shank.


  • Tools for the flange assembly and roof elements

  • Tools for the flange assembly and roof elements Pliers Roofing mites used in the assembly of metal sheets, when you need to bend the edges of the sheets. Ticks can be straight, semicircular and curves.


  • Tools for planing profile

  • Tools for planing profile Faltsgebel This serves as a tool for processing, and for stripping the quarters.


  • Tools for Roofing

  • Tools for Roofing Roofing should start with the selection of the necessary equipment that will greatly facilitate and accelerate the work, because it will not have to be distracted by the search for a particular tool.


  • Tools for sawing and cutting materials

  • Tools for sawing and cutting materials Saws Saws used for cutting wood and metals. Saw has a metal tape (disk) with teeth. The spacing between the vertices of two adjacent tooth is called a step, and the gap between the tooth tip and base - the height of the tooth.


  • Tools for planing wood

  • Tools for planing wood Wood planed after sawing. It smooths imperfections and evens out the surface of large dimensions. Tool 3 times longer than conventional planer, so it is easy to whittle the long boards.


  • Tools for sampling and stripping various openings

  • Tools for sampling and stripping various openings chisel and chisel Chisels are joinery and carpentry. As a chisel, chisel consists of a handle, which is made, usually of hardwood or plastic materials, with high strength, as well as paintings, manufactured from stainless steel.


  • Tools for machining holes and execution

  • Tools for machining holes and run Drills Accomplished by drilling holes. To do this, use a drill as spirals drill (manual and electric), gimlets, etc. The drill has a working part, which is divided into cutting and a cylindrical shank that fits into the spindle (rotating shaft with a device for securing the drill, etc.


  • Tools and accessories soap-boiler

  • tools and accessories soap-boiler Fork or whisk to mix ingredients needed. To make things easier, you can buy a mini battery-powered whisk for whipping foam. Spoons of different sizes (dining room, tea, coffee) will be required to add to the melted soap base different ingredients vykladyvaniya mixture into a mold, creating relief on its hot surface, and many other operations.


  • Cultured Stone

  • For material that builders and architects called artificial stone, this name is actually quite conventional. First, there are several proprietary technologies of its production from various developers and manufacturers, and artificial stone because of different firms is somewhat different in composition, properties and production technologies.


  • Making homemade soap

  • Making homemade soap Very nice to use soap, which is composed of natural ingredients: milk, chocolate, oats, honey, fat and essential oils, clay and more.


  • Making paintings. Technology implementation bedridden and standing seam

  • Making paintings. Technology implementation bedridden and standing seam next type enforcement preparatory works are paintings manufacturing - prefabricated parts ordinary coating - and blank sheets for eaves, gutters wall, valleys, etc.


  • Measuring Tools

  • Measuring instruments line Serves to measure the details of small size. Roulette Necessary to determine the size of large workpieces.


  • Insulation chimney

  • insulation chimney According to the rules stove stove business safe operation is ensured if the distance from the tree to smoke is not less than one and a half bricks or 38 cm in practice often do fire butchering when passing chimney through the ceiling in a brick kiln (ie, 25 cm) , paving the asbestos board or felt impregnated with clay mortar.


  • How and why it is necessary to remove hydrogen sulfide from the water?

  • How and why it is necessary to remove hydrogen sulfide from the water? Hydrogen sulfide - a colorless gas with a characteristic odor of decaying protein. Hydrogen sulfide is very poisonous.


  • Natural soap?

  • What natural soap? Mistakenly believing that any handmade soap - natural. Usually, this phrase denotes soap, in the manufacture of which a large part of the work was done manually by hand is cut and weighed soap base, manually add the necessary ingredients and manually poured into the base form, To create a natural soaps used only fatty oils, alkali and natural supplements, such as essential oils and natural dyes.


  • How to build a house of foam

  • Foam - quality and affordable building material, which enjoys great demand today for the construction of country houses, villas, commercial and residential buildings, since it can be used in buildings embody the most original and unusual designs.


  • How to insulate the floor foam

  • To your apartment differed present comfort and give you satisfaction, recommend learn How to insulate the floor foam . Foam has the following properties: sound insulation, as well as the important property - it's thermal conductivity.


  • How to choose toilet

  • Modern plumbing stores offer a huge selection of different types of toilets and models, differing in material manufacturing, sizes and colors, the design of the tank and many other factors. Some models presented familiar and traditional, and some just hit using unusual materials and modern high technology.


  • Stonework in the construction of stairs

  • Stonework in the construction of stairs Stairs are external (yard) and internal. Outdoor stairs are often made of brick, stone and concrete. Basic requirements and fulfill their technology works similar to conventional construction work, but there are some specifics.


  • Brick, - the Ukrainian market

  • Most domestic bricks made on the old Soviet factories Despite the massive expansion in the construction market technology associated with monolithic reinforced concrete, as well as with newfangled aerated concrete, ceramic brick classic take their positions is not going to. This is not surprising.


  • Masonry

  • Masonry For brickwork will need the following tools: - Mortar shovel; - Trowel; - Hammer-Kirochka; - Pointing; - Shvabrovka; - Plummet; - Building level; - Wooden square; - Cord-prichalku; - Wooden poryadovkoy.


  • Brick wells

  • Brick wells Brick wells do when laying underground utilities and construction of buildings with underground device. Depending on the purpose and size of wells spread round or rectangular with a wall thickness of not less than one brick.


  • Masonry stoves and fireplaces

  • Masonry stoves and fireplaces Operating properties ovens, stoves and fireplaces are largely determined by the quality of masonry, which in turn depends on the quality of performance, the materials used, the size and order compliance calculations bricks (poryadovok) purity flues.


  • Masonry arches and bridges

  • Masonry arches and bridges Part of the wall, overlapping windows or doorway, called a jumper. If the load is transferred from the slab to the wall directly above the opening, apply bearing precast concrete lintel.




BACK NEXT TOP

Site is a private collection of materials and is an amateur informational and educational resource. All information is obtained from public sources. The administration does not apply for authorship of the materials used. All rights belong to their owners